Disminución de defectos por soldadura inestable en calentadores de agua

Humberto García Castellanos; Cynthia  Márquez Márquez; Ericka Berenice Herrera Ríos; Adrián Francisco Loera Castro

doi:10.61117/ipsumtec.v6i3.218

Authors

Humberto García Castellanos Tecnológico Nacional de México https://orcid.org/0000-0002-4684-4888
Cynthia Márquez Márquez Tecnológico Nacional de México https://orcid.org/0009-0000-8780-9539
Ericka Berenice Herrera Ríos Tecnológico Nacional de México https://orcid.org/0000-0002-6964-5830
Adrián Francisco Loera Castro Tecnológico Nacional de México https://orcid.org/0000-0003-1694-6792

DOI:

https://doi.org/10.61117/ipsumtec.v6i3.218

Keywords:

18-inch diameter heater, First pass yield, Welding defects, DMAIC methodology, Glass spray

Abstract

There is a worldwide corporation dedicated to the manufacturing of the main water treatment devices, it has water heater manufacturing plants in India, China, the United States, Brazil and Mexico, being at the forefront of the highest technology devices for water treatment.

Currently, the industry in manufacturing system focuses on the needs of the client, it is intended to improve the process in the area of manufacturing water products.

One of the main causes of a “code 8” defect is the application of glass to the barrel in spray machines, due to a variation in brushing and cleaning at the bottom of the barrel.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

John C. Ward, George O.G. Löf, (1976). Long-term (18 years) performance of a residential solar heating system. octubre 27, 2022, de ScienceDirect Sitio web: https://www.sciencedirect.com/science/article/abs/pii/0038092X76900578 DOI: https://doi.org/10.1016/0038-092X(76)90057-8

Ao. Smith. (2011). 2011 Annual Report. octubre, 2022, de Ao. Smith Sitio web: https://www.sendd.com/~webdrop/ezproxy/201202/A.%20O.%20Smith%20Corporation%202011%20Annual%20Report.pdf

Méndez, M. M. M., Rascón, M. A. G., López, M. L. E. M., & Ramírez, M. G. C. APLICACIÓN DE LA INGENIERÍA INVERSA A UN DISPOSITIVO DE CONTENCIÓN DE FUGAS DE AGUA. In Memorias 8º Congreso Internacional de Investigación Científica Multidisciplinaria (p. 102).

Gijo, E.V., Antony, J., Kumar, M., McAdam, R. and Hernandez, J. (2014), "An application of Six Sigma methodology for improving the first pass yield of a grinding process", Journal of Manufacturing Technology Management, Vol. 25 No. 1, pp. 125-135. https://doi.org/10.1108/JMTM-12-2011-0109 DOI: https://doi.org/10.1108/JMTM-12-2011-0109

Wahab, A. N. A., Mukhtar, M., & Sulaiman, R. (2013). A conceptual model of lean manufacturing dimensions. Procedia Technology, 11, 1292-1298. DOI: https://doi.org/10.1016/j.protcy.2013.12.327

Mostafa, S., & Dumrak, J. (2015). Waste elimination for manufacturing sustainability. Procedia manufacturing, 2, 11-16. DOI: https://doi.org/10.1016/j.promfg.2015.07.003

Sazonova, S. A., Nikolenko, S. D., Osipov, A. A., Zyazina, T. V., & Venevitin, A. A. (2021, April). Weld defects and automation of methods for their detection. In Journal of Physics: Conference Series (Vol. 1889, No. 2, p. 022078). IOP Publishing. DOI: https://doi.org/10.1088/1742-6596/1889/2/022078

Gallach, F. S., Soler, V. G., Molina, A. I. P., & Bernabeu, E. P. (2020). Diagrama de Pareto y Lean Manufacturing. APLICADA 2020, 19.

De Mast, J., & Lokkerbol, J. (2012). An analysis of the Six Sigma DMAIC method from the perspective of problem solving. International Journal of Production Economics, 139(2), 604-614. DOI: https://doi.org/10.1016/j.ijpe.2012.05.035

Ngeta, J. (2009). A survey of implementation of world class manufacturing practices: case of listed companies (Doctoral dissertation).

Realyvásquez-Vargas, A., Arredondo-Soto, K. C., Blanco-Fernandez, J., Sandoval-Quintanilla, J. D., Jiménez-Macías, E., & García-Alcaraz, J. L. (2020). Work standardization and anthropometric workstation design as an integrated approach to sustainable workplaces in the manufacturing industry. Sustainability, 12(9), 3728. DOI: https://doi.org/10.3390/su12093728

Trafimow, D. (2003). Hypothesis testing and theory evaluation at the boundaries: surprising insights from Bayes's theorem. Psychological review, 110(3), 526. DOI: https://doi.org/10.1037/0033-295X.110.3.526

Reosekar, R. S., & Pohekar, S. D. (2014). Six Sigma methodology: a structured review. International Journal of Lean Six Sigma. DOI: https://doi.org/10.1108/IJLSS-12-2013-0059

Fontalvo Herrera, T., De La Hoz Granadillo, E., & Morelos Gómez, J. (2018). La productividad y sus factores: incidencia en el mejoramiento organizacional. Dimensión empresarial, 16(1), 47-60. DOI: https://doi.org/10.15665/dem.v16i1.1897

Patel, A. S., & Patel, K. M. (2021). Critical review of literature on Lean Six Sigma methodology. International Journal of Lean Six Sigma. DOI: https://doi.org/10.1108/IJLSS-04-2020-0043

Singleton, B., & Wilczynski, M. (2009, September). Continuous coating of commercial water heaters. In 60th Porcelain Enamel Institute Technical Forum, Volume 19, Issue 5 (Vol. 1, No. 5, p. 145). John Wiley & Sons. DOI: https://doi.org/10.1002/9780470294512.ch26

Serlin, R. C. (1987). Hypothesis testing, theory building, and the philosophy of science. Journal of Counseling Psychology, 34(4), 365. DOI: https://doi.org/10.1037//0022-0167.34.4.365

Grant, D. A. (1962). Testing the null hypothesis and the strategy and tactics of investigating theoretical models. Psychological review, 69(1), 54. DOI: https://doi.org/10.1037/h0038813

Iannelli, L., & Prieto, R. (2016). Eficiencia en el calentamiento de agua. Petrotecnia.

Armijos Correa, N. O., & Morales Muyulema, L. D. (2013). Diseño y Construcción de un Sistema de Calentamiento de Agua para la Curtiduría Cueros & Cueros (Bachelor's thesis).